Product Title: Scale Trains SXT32396 CSX ES44AH Locomotive Rivet Counter Pride In Service Spirit Of Our First Responders #911 DC/ DCC ready HO Scale
Manufacturer: Scale Trains
Scale: HO
Condition: Item Condition: C-9, Box Condition P-8
Operational Status: This item is assumed to be fully operational according to the manufacturer's specifications.
TCA Condition/Grading Standards: C-9: Factory New—Brand New: all original; unused; may evidence factory rubs and the slightest evidence of handling, shipping and having been test run at the factory.
TCA Box Grading Standards: P-8: Like New: Complete and all original. Evidence of light use and aging, additional notations since leaving publisher or manufacturer. Contents of box may be missing.
Photos: See photos
Manufacturer Information:
- Road number 911 Pride in Service Spirit Of Our First Responders
- A portion of the proceeds from the sale of this locomotive benefit non-profit organizations
- Officially licensed by CSX
- Paint scheme created using paint & lettering diagrams provided by CSX
- Operating LED front, rear, and side walkway lights
- Directional LED headlights
- All-wheel drive and electrical pick-up
- Factory-applied wire grab irons and snowplow
- Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more
In 2019, CSX partnered with Operation Gratitude, Blue Star Families, Operation Homefront, Wounded Warrior Project, and First Responders Children’s Foundation as part of their Pride In Service™ initiative. To honor our heroes, CSX painted three unique “Spirit” locomotives: Armed Forces, First Responders, and Law Enforcement. We worked closely with CSX to accurately reproduce these special locomotives in HO Scale. A portion of the model proceeds will benefit each of these exceptional non-profit organizations.
Road Number Specific ScaleTrains
- Era: 2019 to present
- Series 800-949, built 1-9/08
- Road number 911
- Pride in Service “Spirit Of Our First Responders”
- Officially licensed by CSX
- Paint scheme created using paint & lettering diagrams provided by CSX
- First responders printed on cab side windows
- Operating LED front, rear, and side walkway lights*
- Operating LED front deck-mounted alternating ditch lights**
- Operating LED ground light on left side of locomotive*
- See-through round-hole stepwell steps
- Walkway with front anticlimber and support brackets
- Front and rear raised pilot-mounted Multiple Unit (MU) receptacles
- Front dummy Multiple Unit (MU) receptacles mounted to front anticlimber supports
- Single trainline hose with silver gladhand
- Rear wide-spaced dual dummy Multiple Unit (MU) receptacles
- Front and rear ECP brake equipment box and cable mounted on pilot face
- Pilot-mounted battery charging receptacles
- Sill-mounted tow chain
- Wide profile end handrails
- Early handrails with wrap over stanchions
- Front nose headlight
- Front straight grab irons mounted directly to the nose
- Front left side mounted narrow nose drop grab iron
- Left nose door with window
- Front high-mounted (cab) numberboard housings
- Early cab with optional 4 side windows and barrel bolt latches on subbase doors
- Left side under cab front access bolted X panel, rear door with square corrugated grille
- Dual cab side blue flag holder
- LSL (Locomotive Speed Limiter) indicator lights on cab sides (Non-operating)
- Tall mirror mounted in front of sliding cab side windows on both sides; additional small mirror on right side
- Cab roof octagonal antenna dome with small dome antenna
- Sand box clean out door with knuckle buster latch and hinge
- Small hinged inverter cabinet door
- Left side dynamic brake cab: tri blower dynamic brake with flush exhaust
- Right side dynamic brake cab: door with grille, small grille, door with grille, and door with grille
- Short right side air intake grille
- Left side auxiliary cab: 3 medium doors with latches on the #2 door and long auxiliary cab filter box door
- Right side auxiliary cab: 4 doors with latches on #1 and #4 doors
- Lost wax brass cast Leslie RS-5T-RRO horn mounted on engine cab roof
- ES44 style engine cab doors: latched first door in each set of three
- Left side exhaust cab doors: latched last door in set of three
- Flush heat exchanger housing
- Raised radiator grille
- Right side radiator cab: fourth and fifth doors have tall grilles
- Angled water fill box
- AEI tag mounted to right sidesill
- Dual Graham-White (Prime) 075 air filters
- Graham-White 994-500 air dryer
- Late GE Steerable trucks with separately applied brake cylinders, air plumbing, rotating bearing caps, and reinforcement bar under center journal
- 5,300-gallon fuel tank with internal waste retention tank, digital fuel gauge, vertical fuel gauge, and round fuel gauge
- Dual fuel fills per side with rear fill “blanked”
- Angled top left side fuel tank top box
- Long sump drainpipe attached to the end of the fuel tank
- Semi-scale coupler buffers equipped with die-cast metal semi-scale SBE bottom shelf knuckle couplers
Rivet Counter ES44 Locomotives Also Feature
- Fully assembled
- Multiple road numbers
- Directional LED headlights
- Printed and LED lighted number boards*
- GE “nub” tread plate on walkways
- Detailed cab interior with separate floor, rear wall, seats, control stand, and grade crossing camera
- Tinted cab side windows
- Etched metal see-through dynamic brake intake grilles with blower motors visible inside
- See-through dynamic brake exhaust
- Separate exhaust stack
- 22 individually applied etched metal see-through radiator intake and exhaust grilles on sides and top of radiator compartment
- Accurately profiled frame with separately applied plumbing and cabling
- Factory-applied wire grab irons, snowplow, spare knuckles, 3-hose MU clusters with silver gladhands, uncoupling levers, windshield wipers, mirrors, sunshades, air tanks, fuel tank mounted electronic bell, brake wheel, and more.
- All-wheel drive
- All-wheel electrical pick-up
- Dual flywheels
- Motor with 5-pole skew wound armature
- Printing and lettering legible under magnification
- Operates on Code 70, 83, and 100 rail
- Packaging safely stores model
- Minimum Radius: 18”
- Recommended Radius: 22
- DCC & sound equipped locomotives also feature:
- ESU-LokSound 5 decoder with “Full Throttle”
- Dual cube-type speakers
- Accurate GEVO-12 prime mover and auxiliary sounds, horn, bell, and more
- ESU-designed PowerPack with two (2) super capacitors***
- Operates on both DC and DCC layouts
- DCC & sound ready locomotives also feature:
- Operate using DC
- DCC ready with 21-pin connector
* Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC
** In DC operation, both front ditch lights illuminate; rear ditch lights (if equipped) do not illuminate
*** Compatible with appropriately programmed ESU decoders while operating using DCC